Highsparks TCS Ltd have a large fleet of Tower Cranes available nationwide for Hire and Sale. Below is a selection of the Flat Top, Luffing and Self Erecting Tower Cranes.  Please bear with us as the site is still under construction. If you don’t see what you are after or have any questions for our team of experts call us here, email us at enquiries@highsparks.co.uk or use our contact form

Flat Top Cranes

Industry standard, easy to erect and dismantle modular cranes that does not need pendant bars, since the efforts from the jib and counter jib are directly supported by the slewing ring of the crane.

Flat top cranes have faster hook time and are easier to erect than luffing cranes. They can be erected on a ballast base or fixing ancors and climbed to heights in excess of 100m. Please note Flat Top Cranes can over sail neighbouring properties, sometimes this can cause a problem and permission is normally needed to do so. When this is an issue the use of a Luffing Crane is advised. Our available Flat Tops are shown below:

Luffing-Jib Cranes

The luffing-jib cranes are used in work areas with limited airspace, or where there’s a need to be able to install a crane between two buildings, functioning in a working radius of up to 65 meters, but with a much reduced minimum out of-service-radius. Our available Luffing-jib Cranes are shown below:

If you cant find what you are looking for get in touch to discuss your requirements using our contact form